Ford Performance Gen 4 5.0L Coyote Crate Engine 480HP With Manual Flywheel

Gen 4 Mustang 5.0L Coyote Engine - For MANUAL Transmission Vehicles:

Now you can get your hands on the newest 5.0L Coyote all-aluminum crate engine from the Ford Performance Engine Team! This original equipment engine is the same as found on the 2024 Mustang GT. This modern 5.0L 32-valve DOHC V-8 uses advanced features such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 horsepower and 415 ft.-lb.+ of torque (with premium fuel). The lightweight plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance!

Product Features:

• 480 Horsepower @ 7,150 rpm. with premium fuel.
• 415 ft.-lb.+ of Torque @ 4,900 rpm. with premium fuel.
• 12.0:1 Compression ratio.
• Bore 93mm x stroke 92.7mm.
• Hypereutectic aluminum pistons.
• Sintered steel connecting rods as used on BOSS302 Mustang.
• Forged steel crankshaft.
• Aluminum block which features plasma transferred wire arc spray weld liner coating.
• Longer, 12 mm head bolts for higher clamp load.
• 9.5-qt capacity steel oil pan.
• Tuned composite intake manifold provides efficient air delivery and weight savings.
• Twin 80 mm single bore "drive by wire", electronic throttle bodies with variable runner control.
• High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing.
• Includes engine harness and dual mass flywheel.
• For engine equipped with automatic flex plate, see M-6007-M50DAUTO instead.
• Engine mount bosses and bell housing mount pattern common to 5.0L modular engines.
• Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY.
• Engine weight: 453 lbs.without front accessory drive components.
• Same as production on the 2024 Mustang GT.
• Made in Canada.
• Alternate Part Number: M6007M50D

Please contact us with your VIN number prior to placing your order if you would like to confirm fitment and any additional required parts for your vehicle application.

Fitment / Application Notes:

• For engine equipped with automatic flex plate, see M-6007-M50DAUTO instead.
• Does NOT include vehicle harness or PCM.
• Use Ford Performance M-6017-M50D Control Pack which includes wiring, PCM and installation kit, designed for project car installation.
• Does NOT include alternator. For alternator kit, please see:
• M-8600-M50BALT
• M-8600-M50ALTA
• M-8600-M50ALTD
• Note: Driver side exhaust flange utilzes the 5.2L pattern.
• Note: Photo and specs may vary.
• 5.0L Coyote air conditioning kit is available, please see M-8600-M50AC
• 5.0L Mustang motor mount kit is available, please see M-6038-M50
• 5.0L Mustang engine cover kit is available, please see M-9680-M50D

ATTENTION:

This part is intended as a replacement part for use only in the application(s) identified in the product description. Installation of this part in a vehicle for which it is not intended may violate U.S. and Canadian laws and regulations related to motor vehicle emissions.

PLEASE NOTE: Crate engines, in most cases, are not direct replacements and will require modifications and additional accessories. If you are looking for an original replacement engine for your vehicle, please contact us with your VIN and we will provide you with a quote.